Reassembly And Remounting - Suzuki Vinson LT-A500F Service Manual

7-56 CHASSIS
• Remove the hub bearings using the special tools.
09923-74510: Bearing remover
09930-30102: Sliding hammer
R E A S S E M B L Y A N D R E M O U N T I N G
Reassemble and remount the rear axle in the reverse order of
removal and disassembly. Pay attention to the following points:
• Apply SUZUKI SUPER GREASE "A" to the hub bearings and
dust seals before installing them.
For USA
;fl*99000-25030: SUZUKI SUPER G R E A S E "A"
For the other countries
JigH99000-25010: SUZUKI SUPER G R E A S E "A"
• Install the hub bearings using the special tool.
ITS5LI 09913-70210: Bearing installer set
• Install the dust seal using the special tool.
09913-70210: Bearing installer set