R E A S S E M B L Y
Reassemble the carburetor in the reverse order of disassem-
bly. Pay attention to the following points.
PILOT SCREW
• After cleaning, install the pilot screw © to the original setting
by turning the screw in until it lightly seats, and then backing
it out the same number of turns counted during disassembly.
© Pilot screw
© Carburetor body
A C A U T I O N
Replace the removed O-ring with a new one.
• Install the diaphragm.
NOTE:
When installing the diaphragm, make sure the tab ® of the dia-
phragm is aligned with the convex section (§) of the carburetor
body's rim.
REMOUNTING
Remount the carburetor assembly in the reverse order of
removal. After the carburetor assembly has been remounted
onto the engine perform the following adjustments:
* Throttle cable play
* Engine idle speed
FUEL AND LUBRICATION SYSTEM
2-7
(HT
2-8
3
5-13