Range Lever Inspection; Range Lever Reassembly And Remounting - Suzuki Vinson LT-A500F Service Manual

7-62 CHASSIS
• Remove the range lever.
Remove the O-rings and spacer.
A C A U T I O N
Replace the removed O-rings with new ones.
INSPECTION
Inspect the range lever assembly for wear or damages. If any
damages are found, replace the range lever assembly with a
new one.
REASSEMBLY AND REMOUNTING
Reassemble and remount the range lever in the reverse order
of removal and disassembly. Pay attention to the following
point:
• Apply SUZUKI SUPER GREASE "A" to the spacer, mating
surface of the range lever, and O-rings.
For USA
99000-25030: SUZUKI SUPER G R E A S E "A"
For the other countries
99000-25010: SUZUKI SUPER G R E A S E "A"
• Align the slit © in the range lever arm with the punch mark
© on the range lever.
NOTE:
Adjust the range lever cable, after installing the range lever and
its cable. fcZF 7-65 and 7-66)