Range Lever Cable - Suzuki Vinson LT-A500F Service Manual

RANGE LEVER C A B L E
• Apply SUZUKI SUPER GREASE "A" to the sliding parts of
the range lever cable and the range lever before installation.
For USA
^ 1 9 9 0 0 0 - 2 5 0 3 0 : SUZUKI SUPER G R E A S E "A"
For the other countries
^ 1 9 9 0 0 0 - 2 5 0 1 0 : SUZUKI SUPER G R E A S E "A"
• Attach the range lever cable, washer, and E-ring to the range
lever.
• Install the range lever ® onto the crankcase camshaft as
shown, and then tighten the bolt © securely.
Set the range lever © to the front (low) position on the
crankcase and the range shift lever ® to the front (low) posi-
tion on the range lever case bracket.
• Install the cable and clip @ to the stopper © located on the
crankcase side.
A C A U T I O N
Make sure the installation angle of the range lever
is accurate and its position is adjusted properly.
Do not to kink the push-pull cables during installa-
tion. Kinking the push-pull cables will increase the
sliding resistance and cause improper shifting.
CHASSIS 7-65