Replacing The Solenoid - Sega TARGET BRAVO OPERATION GHOST Owner's Manual

10-5 REPLACING THE SOLENOID

1
Refer to 14-2
take off the controller support and scope body.
2
Refer to Step 2 of 14-4 "REPLACING THE MICROSWICH" and take off the cover L.
10
3
Disconnect the 1 connector.
4
Remove the 4 screws and take off the solenoid. Be careful not lose the spring and other small parts.
74
REMOVING THE CONTROLLER SUPPORT" and 14-3 " REMOVING THE SCOPE" to
"
CONNECTOR (1)
SM2P
SCREW (4)
M4 x 6, w/spring washer
SOLENOID