Removing The Controller Support - Sega TARGET BRAVO OPERATION GHOST Owner's Manual

10-2 REMOVING THE CONTROLLER SUPPORT

1
Refer to 10-1"REMOVING THE CONTROL UNIT " and take off the control unit.
2
Using an Allen wrench, remove the 6 hexagon socket head screws, and take off the 4 controller supports.
NOTE: When reattaching reinforcement parts, always refer to the fiture to ensure that screws are not put into the
wrong places. Also, regularly check that the screws have not loosened over time.
HEXAGON SOCKET HEAD SCREW (2)
M3x8
CONTROLLER SUPPORT
CONTROLLER SUPPORT
CONTROLLER SUPPORT
CONTROLLER SUPPORT
HEXAGON SOCKET HEAD SCREW (1)
M3x16
HEXAGON SOCKET HEAD SCREW (2)
M3x8
HEXAGON SOCKET HEAD SCREW (1)
M3x20
10
69