Turning On The Power - Sega TARGET BRAVO OPERATION GHOST Owner's Manual

2
Fully insert the power cord connector on the side opposite the power plug into the AC unit IEC inlet. Insert
the power cord plug into the outlet.
3
The power code is laid out indoors. Protect the power cord by attaching wire cover to it.
6
6-4

TURNING ON THE POWER

Set the main switch of the AC unit to ON and engage the power.
When you turn on the power, a loading screen will be displayed on screen.
After the SEGA LOGO start up screen is displayed on the LCD screen, the Advertise (Attract) Mode will
start.
The LED's from around the screen will run along with the attract mode and the Billboard will illuminate.
Start up sounds are output from the speakers on the left and right of the cabinet together with the speakers
within the controllers.
Even when the power source has been cut off, credit count, ranking data, game settings and bookkeeping
data are kept stored in the product. However, fractional coin counts (inserted coins that do not amount to one
credit) and bonus adder counts are not kept.
22
WIRE COVER