Sega TARGET BRAVO OPERATION GHOST Owner's Manual page 114

DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
16
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
DISPLAY
CAUSE
COUNTERMEASURES
104
Error 0008
Keychip Access Failed
The key chip could not be accessed.
Reinsert the key chip and restart RINGWIDE.
If this does not fix the problem, contact the office listed in this manual or the
point of purchase for this product.
Error 0010
Unexpected Game Program Failure
The game program crashed due to an unexpected error.
Turn the power off and then restart the RINGWIDE.
If that doesn't fix the problem, contact the office listed in this manual or the
point of purchase for this product.
Error 0020
EXIO Not Found
The I/O board inside RINGWIDE is not recognized.
Turn the power off and then restart the RINGWIDE.
If that doesn't fix the problem, contact the office listed in this manual or the
point of purchase for this product.
Error 0021
Main board Malfunctioning
The main board does not recognize itself.
Contact the office listed in this manual or the point of purchase for this
product.
Error 0022
Game Program Not Found on Storage Device
There is no game program on the storage device.
Use the installation media (DVD DRIVE, etc.) to reinstall the game.
Error 0023 - 0026
Main board Malfunctioning
Failed to access the main board.
Turn the power off and restart the RINGWIDE.
If this does not fix the problem, contact the office listed in this manual or the
point of purchase for this product.
Error 0027
Low Battery
The button battery may be depleted.
Replace the button battery.
Error 0041
Game Program Not Found on Install Media
There is no game program on the install media.
Check that the game program, place on the install media (DVD DRIVE
etc.), and the key chip correspond to each other.