Sega TARGET BRAVO OPERATION GHOST Owner's Manual page 93

CLEANING THE COIN SELECTOR (MECHANICAL).
1
Remove and clean smears by using a soft cloth dipped in water or diluted chemical
detergent and then squeezed dry.
2
Remove the CRADLE.. When removing the
retaining ring (E ring) be very careful so as
not to bend the rotary shaft.
3
Remove stain from the rotary shaft and
shaft receiving portions by wiping off with a
soft cloth. etc.
4
After wiping off as per previous step, further apply a dry cloth to completely dry the
Coin Selector.
Once every month, when performing the Coin SW Test, simultaneously check the
following:
Does the Coin Meter count satisfactorily?
Does the coin drop into the cashbox correctly?
Is the coin rejected when inserted while keeping the REJECT Button pressed down?
12-1 FIG 2
Insert a coin while keeping
the REJECT Button pressed
d o w n a n d c h e c k i f i t i s
rejected.
12-1 FIG 3
CRADLE
12
83