Install The Controller; Precautions - Allen-Bradley Compact GuardLogix 5370 User Manual

Precautions

Install the Controller

Topic
Precautions
Compact GuardLogix 5370 Controller Parts
Install the Secure Digital (SD) Card
Plan the System
Assemble the System
Mount the System
Mount the System
Connect Power to the Control System
Connect to the Controller via a USB Cable
Connect the Controller to an EtherNet/IP Network
ATTENTION: Environment and Enclosure
This equipment is intended for use in a Pollution Degree 2 industrial
environment, in overvoltage Category II applications (as defined in
IEC 60664-1), at altitudes up to 2000 m (6562 ft) without derating.
This equipment is supplied as open-type equipment. It must be mounted
within an enclosure that is suitably designed for those specific environmental
conditions that will be present and appropriately designed to prevent
personal injury resulting from accessibility to live parts. The enclosure must
have suitable flame-retardant properties to prevent or minimize the spread of
flame, complying with a flame spread rating of 5VA or be approved for the
application if nonmetallic. The interior of the enclosure must be accessible
only by the use of a tool. Subsequent sections of this publication may contain
additional information regarding specific enclosure type ratings that are
required to comply with certain product safety certifications.
In addition to this publication, see the following:
• Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1, for additional installation requirements
• NEMA 250 and IEC 60529, as applicable, for explanations of the degrees of
protection provided by different types of enclosures
Rockwell Automation Publication 1769-UM022C-EN-P - June 2018
2
Chapter
Page
21
23
24
25
26
27
27
31
31
32
21