Allen-Bradley Compact GuardLogix 5370 User Manual page 50

Chapter 3 Complete the Controller Setup
50
Complete these steps to use the AutoFlash utility to load firmware.
IMPORTANT These steps show a 1769-L36ERMS controller. The same steps would also
apply to all Compact GuardLogix 5370 controllers with slight variations in
screens.
1. Make sure that the network connection is made and your network driver
is configured in RSLinx Classic software.
2. Create a controller project.
3. Click RSWho
The RSWho Active dialog box appears
4. Navigate over the Ethernet network and select the Compact
GuardLogix controller.
5. Click Download.
TIP You can click Update Firmware instead of Download to complete this
process. If you do so, skip to
Rockwell Automation Publication 1769-UM022C-EN-P - June 2018
to specify the controller path.
step 6.