Allen-Bradley Compact GuardLogix 5370 User Manual page 71

Copy and Paste a SNN
If the module's configuration is owned by another controller, you may need to
copy and paste the SNN from the configuration owner into the module in your
I/O configuration tree.
1. In the software configuration tool of the module's configuration owner,
open the Safety Network Number dialog box for the module.
2. Click Copy.
3. Click the General tab on the Module Properties dialog box of the I/O
module in the I/O Configuration tree of the consuming controller
project.
This consuming controller is not the configuration owner.
4. Click to the right of the safety network number to open the Safety
Network Number dialog box.
5. Click Paste.
6. Click OK.
Rockwell Automation Publication 1769-UM022C-EN-P - June 2018
Communicate Over Networks Chapter 5
71