Configure Standard Distributed I/O Modules On A Devicenet Network - Allen-Bradley Compact GuardLogix 5370 User Manual
Hide thumbs
Also See for Compact GuardLogix 5370:
- Reference manual (172 pages) ,
- Original instructions manual (19 pages)
Table of Contents
Advertisement
Chapter 6
Add and Configure Standard I/O Modules
Configure Standard
Distributed I/O Modules on a
DeviceNet Network
100
The New Module dialog box appears.
6. Configure the new I/O module as necessary and click OK.
7. Repeat these steps to add the desired distributed I/O modules.
The following graphic is an example of a 1769-L36ERMS control system that
uses distributed I/O modules over an EtherNet/IP network.
1734-AENTR POINT I/O
1794-AENTR FLEX I/O
Your Compact GuardLogix 5370 controller system can use standard distributed
I/O modules on a DeviceNet network.
Complete these steps to configure standard distributed I/O modules on a
DeviceNet network.
1. If you have not done so, install a 1769-SDN Compact I/O DeviceNet
scanner into the local bank of your Compact GuardLogix 5370
controller system.
Rockwell Automation Publication 1769-UM022C-EN-P - June 2018
1769-L36ERMS Controller
1732E-IB16M12R
PanelView™ Plus
Advertisement
Table of Contents
