Table of Contents
Advertisement
Menu Description
Menu
Service Card
1.
Supplies
Total
x
Supplies Selectkey
Total
x
2.
Milk quantity
1 cup
3.
Milk quantity
2 cups
4.
Macchiato
Waittime:
12s
5.
Espr. Macchiato
Foamdelay: 3.2s
© 2009 by Thermoplan AG, Subject to change
Technical Manual
After entering the service level 1, the display reads „Service Card".
The adjustments can now be made.
The menu Supplies Total provides information on the number of products served. Press the desired
product selection key to show the corresponding number of servings. There are two different totals
available:
-
Supplies
This appears automatically at first. First the total of grinder 1 and by pressing the
individual product keys the product's total.
Reset totals as descibed below.
-
Supplies Selectkey
Press the „decaf" key and you will receive the total of grinder 2 and by pressing the
individual product keys the product's total.
Reset totals as descibed below.
Reset product totals to 0
Press the „clear" key. Machine asks „clear counter?". Press „clear" key again and the
counter will be set to zero.
In this menu you can change the amount of milk and milk foam that will be dispensed. Use the
„Clean" key to change between „Milk quantity" (M) and „Milk foam quantity" (F).
Use the Minus and Plus key to change the value (in seconds).
Instead of using the Minus- and Plus-key, you can dispense a test coffee, which the machine uses
as reference. To do so press the respective milk beverage key twice, the automatic dosing will be
started. As soon as the desired level is reached press the same product key once to stop and save
the amount of milk dispensed. Now milk foam is dispensed. As soon as the desired level is reached
press the same product key once to stop and save the amount of milk foam dispensed.
By pressing the Minus or Plus key in the parameter Macchiato Wait Time the waiting time between
the milk and coffee dispensing for the Latte Macchiato can be programmed.
Default-parameter is 12 seconds, i.e by pressing on one of the 2 Latte Macciato products milk will
be dispensed first, then there will be a 12 second waiting time and subsequently the coffee will be
dispensed. During the waiting time the milk in the glass is able to settle. Once the coffee is filtered
through the milk it pushes the milk froth to the top creating the 3 layers between milk, coffee and
milk froth.
By pressing the Minus or Plus key in the parameter „Espr. Macchiato" the start time for the foam
for a Espresso Macchiato can be programmed. Default-parameter is 0 seconds, which means the
foam will be dispensed after this delay time wich will guarantee a higher product quality.
Description
REV-4
SECTION 3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3.30
Hide quick links:
Advertisement
Table of Contents
