Thermoplan Black&White3 CT Technical Manual page 19

Reset settings to default values
7.
After a second the display reads again „Supplies".
8.
Exit the menu by touching the upper left corner on the display. The product selection screen appears,
the Display reads „Data saved" for a second.
9.
When the display reads „Ready", turn off machine for 10 seconds.
Turn machine back on, the settings are successfully reset.
© 2009 by Thermoplan AG, Subject to change
Technical Manual
REV-4
Exit menu on this way!
Do not turn off machine
before, data will be lost!
SECTION 3
3.19