Access To Service Menu - Thermoplan Aguila AG440 Technical Manual

Troubleshooting - Aguila - 440 - B - en
1

Access to Service Menu

The input and output tests help when searching for an error source. The functionality of all valves, sensors
etc. installed in the coffee machine can be tested.
If the part concerned is not a valve, the status of the selected part can be seen on the display or its function is
activated (e.g. the heater).
To call up the input and output test in the service menu, proceed as follows:
Remove capsule container on the left module.
u
Insert programming key in the rear area of the
u
drawer and turn clockwise.
ð Service menu was entered as technician and
the water inlet valve was opened.
Upon exiting the technician menu, the water
inlet valve is closed again.
In the service menu, navigate to the menu item
u
"Input test left/right" or "Output test left/right".
© Thermoplan AG
Access to Service Menu
TECHNICIAN MENU
<INPUT TEST LEFT>
TECHNICIAN MENU
<OUTPUT TEST LEFT>
5 / 52