Thermoplan Black&White3 CT Technical Manual page 40

Menu
85.
R-Temp. low
not active
86.
Drawer
Time 5s
© 2009 by Thermoplan AG, Subject to change
Technical Manual
In this menu you can set the minimum temperature of the refridgerator by pressing the „Minus" or
„Plus" key. If the value is reached, the display will show a warning message.
Note:
The temperature of the refridgerator cannot be set. This is only a warning message when the set
temperature is reached!
The factory default for the minimum time delay to empty the drawer is set to 5 seconds. By pressing
the „Minus" or „Plus" key the time delay can be selected between 5 to 60 seconds.
The factory default is set to 5 seconds.
Description
REV-4
SECTION 3
X X
X X X X
3.40