Accessing The Service Menu - Thermoplan AGUILA AG220 Service And Technical Manual

SECTION III
Service and Technical Manual
The Aguila coffee machine offers access to two different service menu levels. In the User Level only a few settings can
be changed, for example the display language.
In the Technician Level all settings can be adjusted. To get access to this level, a special programming key is needed.
Only a trained technician is allowed to be in possession of this programming key!
User Level
To access the service menu:
To exit the service menu:
Press the escape-key (lungo-key) several times until the main display („Ready") is shown again.
Technician Level
To access the service menu:
1.
2.
To exit the service menu:
Turn the programming key anti-clockwise and remove it, the main display („Ready") is shown again.
3.4
Press the rinse-butto for about 3 seconds.
Remove the used capsule drawer (AG420: remove used capsule
drawer from left module).
Insert programming key in the back of the drawer and turn it
clockwise.
Figure shows model AG420
Note: Model AG220 does not feature the two air regulators.
REV-6
Black

Accessing the Service Menu

White
© 2016 by Thermoplan AG, Subject to change