Thermoplan BLACK&WHITE ONE BWone-CTM Start-Up

Initial start-up

Follow these steps to prepare the machine for
daily operation.
1.

Remove grounds drawer

Push the POD to the top
Remove grounds drawer
2.

Starting up the machine

Press red main switch
Reinsert grounds drawer
main switch BWone without POD
main switch BWone with POD
© 2013 Thermoplan AG, subject to change
Initial start-up BWone-CTM
3.

Cold start rinse

The machine demands a cold start rinse
Press rinse key on display
After the rinse, the machine will
heat up
4.
Fill bean hopper with coffee beans
Fill the bean hoppers left and right
with fresh coffee beans.
5.
Fill milk
Remove milk container and clean
it thoroughly.
Fill milk container und put it into
the refrigerator.
Guide suction tube into milk container
and close the refrigerator.
Do not use unpasteurised milk! Only use heat treated (e.g. pasteurised or
ultra heat treated) milk. Only use milk with a sell-by date that has not yet
expired. Only pour milk that has already been cooled down (below 5°C)
into the milk container.
Once the milk has been opened, use it up within 24 hours to
prevent health hazards.
805.451_EN_REV-B
6.
Initial start-up finished
The machine is now ready for daily use.
!
Description function keys
Double product key
Cancel key
Grinder change key
Cleaning key (daily cleaning)
Recommendation
Fill the bean hopper with only the daily amount of
beans you really need so that the aroma is preserved.
1