Related Manuals for Thermoplan Black&White3 CT
Summary of Contents for Thermoplan Black&White3 CT
- Page 1 Technical Manual CT / CTS / CTM / CTMS / CBT / CBTM SECTION 3 PROGRAMMING FOX1 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 2 2009-08-28 Complete revision 2009-09-22 Added handling instructions BW3 Touchscreen 2010-07-30 Adjustments to EPROM V1.91 / CBTM added 2011-01-31 Various changes Overview modifications REVISION REVISION REVISION Changes in content, corrections New paging REV-4 © 2009 by Thermoplan AG, Subject to change...
-
Page 3: Table Of Contents
3.14 - 3.16 4. Reset settings to default values 3.17 - 3.19 5. Replacing the EPROM 3.20 - 3.21 Menu navigation 3.22 - 3.28 General overview 3.29 Overview programming 3.30 - 3.40 REV-4 © 2009 by Thermoplan AG, Subject to change... - Page 4 Step forward in programming mode, enter submenus in diagnostic menu Step Step backwards in programming mode Back Set time and date Func1 No function Func2 Settings in programming mode, step forward and backwards in diagnostic menu REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 5 By pressing the -button you can step back to the previous screen. Step back until Service Level 1 (parameter menu) appears, then touch the upper left corner to exit the Service Level. REV-4 © 2009 by Thermoplan AG, Subject to change...
-
Page 6: Basic Settings
To set time and date do as follows: Tap on „Ready“ on the upper left display section. The „Enter PIN“ window appears. Enter Code 4444 and confirm with Enter PIN **** The following screen appears: REV-4 © 2009 by Thermoplan AG, Subject to change... - Page 7 Mo Di Mi Do Fr 10 11 17 18 24 25 It‘s also possible to set time and date in Service Level 1. Enter with Code 1111 and press on Func1 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 8 The displayed names of the products can be customized. To change the names do as follows: Enter Service Level 4. The following screen appears: Press on „Edit Product Names“ to start customizing the names. Tap on the product you wish to change: REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 9 é Ä Ö Ü CTRL ä ö ü Now you can see your changes. To save the new settings, exit by pressing on and confirm the changes in the next window. REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 10 If the „dot“ does not appear or at the wrong position, the screen has to be either repaired or replaced. To exit the test-program touch the screen on any position for at least 2 seconds. REV-4 3.10 © 2009 by Thermoplan AG, Subject to change...
-
Page 11: Copy Settings From Machine To Compactflash
-card do as follows: ® Tap on „Ready“ on the upper left display section. The „Enter PIN“ window appears. Enter Code 4444 and confirm with Enter PIN **** The following screen appears: 3.11 REV-4 © 2009 by Thermoplan AG, Subject to change... - Page 12 By pressing „Save Product Data“ the settings will be copied to the card. After some seconds the button turns green and reads „Product Data saved“. The settings are saved successful. Exit the menu by pressing on The following screen appears: REV-4 3.12 © 2009 by Thermoplan AG, Subject to change...
- Page 13 After pressing on again, the following screen appears: Exit the menu by touching the upper left corner on the display. The product selection screen appears, the process has finished successful. 3.13 REV-4 © 2009 by Thermoplan AG, Subject to change...
-
Page 14: Copy Settings From Compactflash
® as follows: Tap on „Ready“ on the upper left display section. The „Enter PIN“ window appears. Enter Code 4444 and confirm with Enter PIN **** The following screen appears: REV-4 3.14 © 2009 by Thermoplan AG, Subject to change... - Page 15 By pressing „Restore Product Data“ the settings will be copied back to the machine. After some seconds the button turns green and reads „Product Data restored“. The settings are saved successful. Exit the menu by pressing on The following screen appears: 3.15 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 16 Press once on to reach the parameter „Milk quantity“. Step Exit the menu by touching the upper left corner on the display. The product selection screen appears, the process has finished successful. REV-4 3.16 © 2009 by Thermoplan AG, Subject to change...
-
Page 17: Reset Settings To Default Values
To reset the settings do as follows: Tap on „Ready“ on the upper left display section. The „Enter PIN“ window appears. Enter Code 1111 and confirm with Enter PIN **** The following screen appears: 3.17 REV-4 © 2009 by Thermoplan AG, Subject to change... - Page 18 „Supplies“. Step – Press on for 10 sec. until the display reads „Reset !!!“. – Release the -button. The display reads „Machine Reset“ and „Please Wait“. REV-4 3.18 © 2009 by Thermoplan AG, Subject to change...
- Page 19 Do not turn off machine before, data will be lost! When the display reads „Ready“, turn off machine for 10 seconds. Turn machine back on, the settings are successfully reset. 3.19 REV-4 © 2009 by Thermoplan AG, Subject to change...
-
Page 20: Replacing The Eprom
Look for the new menu and enter the recommended parameter into this menu d) Proceed the storage as shown under 1.1 to save the new parameters on the CF card REV-4 3.20 © 2009 by Thermoplan AG, Subject to change... -
Page 21: By Thermoplan Ag, Subject To Change
Save with the according tong and mount all pins fit in the right holes! your settings back from CF-Card to the new EPROM. machine (EPROM)! 3.21 REV-4 © 2009 by Thermoplan AG, Subject to change... - Page 22 Water quantity 2 Tassen 2 cups Auslaufzeit Outlettime Auslaufventil Outletvalve Teezeit Teatime kaffeearoma Coffee aroma M1 1 Tasse M1 1 cup kaffeearoma Coffee aroma M1 2 Tassen M1 2 cups REV-4 3.22 © 2009 by Thermoplan AG, Subject to change...
- Page 23 1 Tasse Powder quantity Pulvermenge M2 2 cups 2 Tassen Prebrew time Vorbrühzeit 1 Tasse 1 cup Prebrew time Vorbrühzeit 2 Tassen 2 cups Prebrew time Vorbrühzeit 1 Tasse 1 cup 3.23 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 24 Press after Nachpressung M2 2 cups 2 Tassen Luftventil Air valve 1 Tasse 1 cup Luftventil Air valve 2 Tassen 2 cups Mühle wechseln Mill change Milchsequenz Milksequence Milchsorte Milk type REV-4 3.24 © 2009 by Thermoplan AG, Subject to change...
- Page 25 Grounds kaffeesatz 800g 800g kaffeedrehzahl Coffeerevolution 1800rpm (1/min) 1800rpm (1/min) Teedrehzahl Tearevolution 1300rpm (1/min) 1300rpm (1/min) Bypassdrehzahl Bypassrevolution 1000rpm (1/min) 1000rpm (1/min) Milchdrehzahl Milkrevolution 900rpm (1/min) 900rpm (1/min) 3.25 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 26 Milchniveau Milkniveau Überwachung Control Milk 1 Milk 1 Milchlevel Modus Milklevel Mode Warnung Warning Debit / Credit Debit / Credit Machine type Maschinentyp normal normal REV-4 3.26 © 2009 by Thermoplan AG, Subject to change...
- Page 27 Cold start rinse 1.5 Liter 1.5 Liter Boilerspülung Boilerpurge Standby Temp. Standby Temp. nicht aktiv not active Wasseranschluss Water Netzdruck normal Option Zähler Option counter 3.27 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 28 V1.05 V1.19 V1.91 V1.08 27.05.2009 02.06.2009 29.03.2010 25.07.2010 Energiesparmode Powersavemode kS-Temp. hoch R-Temp. high nicht aktiv not active kS-Temp. tief R-Temp. low nicht aktiv not active Drawer Satzbehälter Zeit: Time: REV-4 3.28 © 2009 by Thermoplan AG, Subject to change...
- Page 29 Double products can also be programmed individually on one single button. Please note that double-product settings or changes in the menus - Water quantity - Coffee aroma - Powder quantity - Bypass are made in the program „1 cup“. 3.29 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 30 Espresso Macchiato can be programmed. Default-parameter is 0 seconds, which means the Foamdelay: 3.2s foam will be dispensed after this delay time wich will guarantee a higher product quality. REV-4 3.30 © 2009 by Thermoplan AG, Subject to change...
- Page 31 - „2 cups Mill 2“ - „1 cup POD“ (BW3 with POD only) Press the „Minus“ or „Plus“ key to select the display language. Language Options: english, german, french, swedish english 3.31 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 32 Note: By double-clicking the respective product button it will automatically grind the amount of time programmed to weigh out the ground coffee. REV-4 3.32 © 2009 by Thermoplan AG, Subject to change...
- Page 33 Press desired product key and set with „Minus“ or „Plus“ key in „Air valve“ menu the time when Air valve air valve opens after pre-infusion. This setting is valid for every coffee-product. 1 cup Base setting is „not active“. Air valve 2 cups 3.33 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 34 Multiple beverages can also be produced by using the default button Multiple. Example: If one of the product keys is programmed with „Multiple“ it is possible by using the Double Product key to multiply 2 - 9 products dispensed. REV-4 3.34 © 2009 by Thermoplan AG, Subject to change...
- Page 35 By pressing the „Minus“ or „Plus“ key you can change the revolution of the water pump during tea Tearevolution products. 1300rpm (1/min) By pressing the „Minus“ or „Plus“ key you can change the revolution of the water pump during Bypassrevolution products with bypass. 1000rpm (1/min) 3.35 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 36 Milk 1 with level: one kind of milk sort with an additional level sensor (only in combination with fridge) OFF: Milk level not controlled (never use this function, danger of milk burning in wendel system!) REV-4 3.36 © 2009 by Thermoplan AG, Subject to change...
- Page 37 Basically the periodic maintenance of the coffee machine depends on its use but must be done at least every six months by an authorized service technician. 3.37 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 38 If the voltage changes during a brew cycle out of the programmed tolerance level the cycle will be completed before the machine will display the error message. REV-4 3.38 © 2009 by Thermoplan AG, Subject to change...
- Page 39 „Plus“ key. If the value is reached, the display will show a warning message. not active Note: The temperature of the refridgerator cannot be set. This is only a warning message when the set temperature is reached! 3.39 REV-4 © 2009 by Thermoplan AG, Subject to change...
- Page 40 The factory default for the minimum time delay to empty the drawer is set to 5 seconds. By pressing Drawer the „Minus“ or „Plus“ key the time delay can be selected between 5 to 60 seconds. Time The factory default is set to 5 seconds. REV-4 3.40 © 2009 by Thermoplan AG, Subject to change...