Special Printing Considerations - Avery Dennison Monarch 9855 RFID Operator's Handbook Manual

S p e c i a l P r i n t i n g C o n s i d e r a t i o n s
Keep in mind the following special printing considerations.
Maximum
Print Speed
2.5/4.0/6.0
ips (inches
per second)
8.0 ips
10.0 ips
♦ The minimum label feed length is 0.75 inches (19 mm) using 8.0 ips or
higher.
♦ 94x5 emulation is not supported using 300 dpi.
♦ The maximum supply and image length with the optional 300 dpi
printhead is 12.0 inches (305 mm).
♦
You may need to clean the printhead and platen roller more frequently
when printing at high speeds. See Chapter 9, "Care and Maintenance,"
for more information.
Printing Method
Thermal Direct
Thermal Transfer
Thermal Direct
Thermal Transfer
Thermal
Direct/Thermal
Transfer
Printhead Knife
Density
203/300 dpi Supported
dots per inch
203/300 dpi Not
Supported
203 dpi only Not
Supported
Peel Mode
Supported
Supported
Not Supported
Printing 8-7