Aa7N - ICP DAS USA I-7021 User Manual

I-7022, M-7022

2.19 $AA7N

Description:
Performs a 10 V calibration on a specified channel.
Syntax:
$AA7N[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be calibrated (00 to FF)
7 Command for the 10 V calibration
N Specifies the channel to be calibrated, zero based
Response:
Valid Command:
Invalid Command:
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
Examples:
Command: $0170
Performs a 10 V output calibration on channel 0 of
module 01 and returns a valid response.
Related Commands:
Section 2.8 $AA1N, Section 2.11 $AA3NVV
92 I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3
!AA[CHKSUM](CR)
?AA[CHKSUM](CR)
Response: !01