Aa3Nvv - ICP DAS USA I-7021 User Manual

I-7022, I-7024, I-7024R
M-7022, M-7024, M-7024L, M-7024R, M-7024U, M-7028

2.11 $AA3NVV

Description:
Adjusts the analog output of a specified channel for
calibration.
Syntax:
$AA3NVV[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be adjusted (00 to FF)
3 Command to adjust the analog output
N The channel to be adjusted, zero based
VV A two-digit 2's complement hexadecimal value
to adjust the analog output. The value of 00 to
5F is to increase 0 to 95 counts and FF to A1 is
to decrease 1 to 95 counts, where each count is
about 4.88uA or 2.44mV for I-7022, M-7022
and M-7028, 2.44uA or 1.22mV for I-7024/24R
and M-7024/24R, 0.61uA or 0.30mA for
M-7024U.
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
76 I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3
!AA[CHKSUM](CR)