Aai - ICP DAS USA I-7021 User Manual

I-7021, I-7021P, I-7022, I-7024, I-7024R
M-7022, M-7024, M-7024L, M-7024R, M-7024U, M-7028

2.28 $AAI

Description:
Reads the INIT terminal status of a module.
Syntax:
$AAI[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be read (00 to FF)
I Command to read the module INIT status
Response:
Valid command:
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
S INIT terminal status of the module
0: The INIT terminal is connected to the GND
terminal
1: The INIT terminal is not connected to the
GND terminal
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3
!AAS[CHKSUM](CR)
109