Default Settings - ICP DAS USA I-7021 User Manual

1.9 Default Settings

Default settings for the I-7021/21P, I-7022, I-7024 and
I-7024R modules are as follows:
▫
Module address: 01
▫
Analog output type: 0 ~ +10 V
▫
Baud rate: 9600 bps
▫
Checksum disabled
▫
Engineering unit format
▫
I-7021/21P and I-7022 jumper setting: internal power
Default settings for the M-7022, M-7024, M-7024L,
M-7024R, M-7024U and M-7028 modules are as follows:
▫
Protocol: Modbus RTU
▫
Module address: 01
▫
Analog output type: 0 ~ +10 V
▫
Baud Rate: 9600 bps
▫
Engineering unit format
▫
M-7022 jumper setting: internal power
26 I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3