Aadodd - ICP DAS USA I-7021 User Manual

M-7024U

2.49 @AADODD

Description:
Sets the digital output ports of a module.
Syntax:
@AADODD[CHKSUM](CR)
@ Delimiter character
AA Address of the module to be set (00 to FF)
DO Command to set the digital output ports
DD A two-digit hexadecimal value, where bit 0
corresponds to DO0, bit 1 corresponds to DO1,
etc. When the bit is 1, it denotes that the digital
output port is on, and 0 denotes that the digital
output port is off.
Response:
Valid command :
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3
!AA[CHKSUM](CR)
149