Spectracom PRISMA VelaSync User Manual page 183

Figure 4-4:
To configure a login banner:
1.
2.
3.
4.
5.
CHAPTER •
4 VelaSync User's Manual Rev. 1
Login banner (example)
Navigate to the MANAGEMENT > Network Setup screen.
In the Actions panel on the left, click Login Banner .
The Network Access Banner window will display. Check the box Enable Custom Banner .
In the Plain Text Banner text box, type in your custom text.
Note: The Plain Text Banner
login interfaces (Web UI, telnet, SSH, FTP, SFTP, serial, etc.). It is not
required to include HTML tags.
Optionally, you may also use the
Note: Enabling and using the
to apply HTML formatting tags to your message (e.g.,
4.6 Miscellanous Typical Configuration Tasks
is used to create a message for all interactive
Web Interface Banner text box.
Web Interface Banner text box will allow you
colors ). Note that this
171