Access Rules - Spectracom PRISMA VelaSync User Manual

2.9 Configuring Network Settings
The Network Services panel has ON/OFF toggle switches for the following daemons and fea-
tures:
SSH : Secure Shell cryptographic network protocol for secure data communication
HTTP : Hypertext Transfer Protocol
2.9.4 Access Rules
Network access rules restrict access to only those assigned networks or nodes defined. If no
access rules are defined, access will be granted to all networks and nodes.
To configure
1.
Navigate to the MANAGEMENT > Network Setup screen.
2.
In the Actions panel on the left, click on Access Control.
3.
The Network Access Rules window displays:
4.
In the Allow From field, enter a valid IP address. It is not possible, however, to add direct
46
Note: In order to configure Access Rules, you need ADMINISTRATOR rights.
a new, or delete an existing access rule:
CHAPTER •
2 VelaSync User's Manual Rev. 1