General Network Settings - Spectracom PRISMA VelaSync User Manual

2.9 Configuring Network Settings
Navigate to MANAGEMENT > Network Setup . The Network Setup screen is divided into
three panels
The
The
as well as the Web UI display mode, details see: "Network Services" on page 45.
The
age VelaSync's network ports via two buttons:
2.9.1 General Network Settings
To expedite network setup, VelaSync provides the General Settings window, allowing quick
access to the primary network settings.
To access the General Settings window:
42
:
panel provides:
Actions
General Settings : Allows quick access to the primary network settings necessary to
connect VelaSync to a network. See "General Network Settings" below.
Web Interface Settings :
Web interface timeout : Determines how long a user can stay logged on.
For more information, see "Web UI Timeout" on page 170.
Access Control : Allows the configuration of access restrictions from assigned net-
works/nodes.
Login Banner : Allows the administrator to configure a custom banner message to
be displayed on the VelaSync Web UI login page and the CLI (Note: There is a
2000 character size limit).
SSH : This button takes you to the SSH Setup window. For details on setting up
SSH, see "SSH" on page 48.
IPMI : Enable/Disable IPMI (ADMIN password required).
Network Services panel is used to enable (ON) and disable (OFF) network services,
Ports panel not only displays STATUS information, but is used also to set up and man-
INFO button: Displays the Ethernet port Status window for review purposes.
GEAR button: Displays the Ethernet port settings window for editing purposes.
CHAPTER •
2 VelaSync User's Manual Rev. 1