Removing/Installing A Hard Disk Drive - Spectracom PRISMA VelaSync User Manual

4.3 Hardware Tasks
Figure 4-1:
4.
Replace the failed power supply module with a replacement unit.
Simply push the new power supply module into the empty bay until you hear a click.
5.
Plug the AC power cord back into the new power supply.
4.3.2 Removing/Installing a Hard Disk Drive
Since the SATA Hard Disk Drives (HDDs) are hot-swappable, and they are RAID configured,
either of the two drives can be removed from the front of the VelaSync chassis, without the need
to open the chassis, or shut down VelaSync.
Proceed as follows:
152
Power supply removal
Note: Only use the approved type of power supply, for more information,
see "Maintenance and Service" on
Note: For additional
https://www.supermicro.com/manuals/superserver/1U/MNL- 1771.pdf
Chapter 2 on page 2-1.
Caution: Allow the hard disk drives to cool before touching.
page 220.
information on the
CHAPTER •
4
power supplies, see
,
VelaSync User's Manual Rev. 1