Spectracom PRISMA VelaSync User Manual page 149

The files can be remotely accessed via the
drive.
Confirming that the A-GPS RINEX Server License is installed on your unit
Activating the A-GPS RINEX Server License functionality
If an A-GPS RINEX Server License is installed on your unit, you have to activate it:
1.
2.
3.
4.
CHAPTER •
3 VelaSync User's Manual Rev. 1
Note: YUMA files (almanac data) are valid for day.
Navigate to TOOLS > SYSTEM: Upgrade/Backup . In the System Configuration panel the
option OPT-AGP A-GPS RINEX Server must be present.
Navigate to INTERFACES > GNSS Reference , and click the GEAR button next to GNSS 0 .
In the A-GPS panel, check the box Generate RINEX/YUMA Files and populate the fol-
lowing options:
Trimble RES-SMT GG receivers only:
Generate YUMA once a day :
If checked [default], enter the desired-time-of-day in the field YUMA File At
[default = 12:00].
If unchecked, determine how often a YUMA file is generated under YUMA
File Every [default=10 s; range = 10 s to 86400 s (1/day)].
Station Name : Enter an alphanumeric 4-letter station name for the server [default:
]. The names of the files generated will include the station name.
spec
Record Duration : Determine the duration for how long to keep the generated data
before it gets overwritten [default: 7 days; range = between 2 and 400 days]
Click Submit to start logging ephemeris and almanac data.
Once you submitted the changes, verify that the setup was successful by clicking on
Status , and confirming that the indicator lamp for Server A-GPS Status is
3.3 Managing References
path on the VelaSync or via the mapped
/pub
RINEX File Every : [default = 10 s]
137