Configuring Notifications - Spectracom PRISMA VelaSync User Manual

4.4.1 Configuring Notifications
To configure Notifications:
1.
2.
CHAPTER •
4 VelaSync User's Manual Rev. 1
Mask the alarm generation for specific events (prevent the alarm)
Enable "SNMP" (to send out an SNMP trap)
Send an email to the address specified in the corresponding "Email Address" column.
Navigate to MANAGEMENT > OTHER: Notifications . The Notifications screen will display:
It is divided into two panels:
The panel, featuring:
Actions
The SNMP Setup button: See "SNMP" on page 54.
The Email Setup button: Configure VelaSync's interface settings for
Exchange email servers and Gmail.
For more information on this subject, see the Spectracom Technical Note
Email Notification Setup
The Events panel, offering three tabs:
Timing : Events for Sync Status and Holdover, Frequency error, Input ref-
erences and the internal oscillator.
GPS : Events related to the GNSS receiver, including antenna cabling, track-
ing less than the minimum number of satellites and GNSS receiver faults.
Systems : Events related to the system operation, including minor and major
alarms being asserted, reboot, timing system errors and option cards.
In the Events panel, choose the Timing , GPS or System tab. Configure your Notifications
(see below), and click Submit.
.
4.4 Notifications
155