Table of Contents
Advertisement
C. IDENTIFYING THE PARTS
This illustration shows the front of the printer with its control
buttons and LED indicator lights.
Pause Button
Power LED
Load/Feed
Button
Ink Low LED
Unload Button
The Pause Button is pressed to pause a job to allow for loading of
label stock and ink cartridges. The printer pauses after the printing
of the current label has finished. The Pause LED will illuminate
when the printer is paused.
The Power LED indicates that the printer is on and ready to receive
print jobs.
The Load/Feed Button is pressed in order to load label stock if the
printer does not automatically detect the stock. When stock is
loaded each press of the button will cause one label to be fed
through the printer.
The Ink Low LED will illuminate when a cartridge has 10% or less
of its ink remaining.
The Unload Button will unload the installed label stock by reversing
it through the printer. Make sure to tear off the
printed labels before pressing the Unload Button.
The Label Tear Bar is a serrated edge for conveniently tearing your
finished labels from the printer. The printer comes with a white tear
bar guard. For smoother label feeding, leave the guard in place
during printing. When you are ready to tear off a label, remove the
guard, tear off the label and replace the guard.
Label Tear Bar
Top Cover
Pause LED
Getting Started 3
Advertisement
Table of Contents
