Table of Contents
Advertisement
Present Options:
Do not present. In this mode the label stock does not move
after the last label is printed. This means that part of the last
label printed is still in the printer. This should be used only if
you have a label rewinder attached.
Present after no activity. This setting will present (feed all
printed labels past the tear off point) at the end of a print job if
the printer does not receive another print job within one second
of the last print job in the queue. You can use this feature to
present at the end of a multi-copy job, a multi-page job or
multiple individual jobs in the queue.
Label Stock
17
Advertisement
Table of Contents
