Table of Contents
Advertisement
present at the end of the print to catch the cut label.
Cut every label. This setting will cut after every label.
Cut after label count. This option will cut after the number of labels
specified in the toggle box that appears when this option is selected.
This is useful if you have front/back labels or sets of labels.
Present Options (Uncheck Cutter Enabled)
Do not present. In this mode the label stock does not move after the
last label is printed. This means that part of the last label printed is
still in the printer. This should be used only if you have a label
rewinder attached.
Present after no activity. This setting will present (feed all printed
labels past the tear off point) at the end of a print job if the printer
does not receive another print job within one second of the last print
job in the queue. You can use this feature to present at the end of a
multi-copy job, a multi-page job or multiple individual jobs in the
queue.
Printing from a Mac
45
Advertisement
Table of Contents
