Solving Print Quality Problems - Primera label LX910e User Manual

B. SOLVING PRINT QUALITY PROBLEMS
Many factors can affect the quality of the print. The following
are listed in order from most likely to least likely:
1. Quality Setting. Change your quality setting. The lowest
(and fastest printing) quality may not be sufficient for many
photos or graphics. The highest quality setting may cause
ink to bleed on certain graphics in combination with certain
label stock. Increasing the quality increases print time
because the printer makes more horizontal movements
across the label.
2. Clean the Cartridge. Run an automatic cleaning print or
manually clean the cartridge as described in Section 6D .
3. Change the Cartridge. Try a new cartridge. Make sure that
the ink cartridge has ink remaining. Check the ink levels
via the PrintHub or Printer Utility (Mac).
4. Align Print Head. Normally, print head alignment is
only necessary after changing a print head. However, in
certain cases, running the alignment again can improve
print quality. Align the print head by opening the
PrintHub or Printer Utility (Mac). Click on the Align Print
Head button on the Cartridge Utilities Tab (second tab).
Follow the onscreen prompts to load your paper for
alignment.
Troubleshooting and Maintenance
60