Table of Contents
Advertisement
5. Clean the Maintenance Station. Power off the printer!
Gently move the cartridge to the left to access the
maintenance station. Clean the maintenance station located
on the right side of the print area. This includes the rubber
cartridge nozzle cap and the plastic roller. Under normal
use this can become dirty with ink. Clean with rubbing
alcohol and a paper towel.
6.
Color Matching. Change your Color Matching setting to
Graphics or Photos via the printer driver preferences. See
Section 4G or 5H.
7.
Media. Make sure your label stock is inkjet printable.
Many thermal label stocks look the same as inkjet but do
not allow the ink to soak into the surface of the media.
8.
Source File Image Mode. The image mode of the source
file may be set to RGB instead of CMYK. This can cause the
color matching to be off. Change the image mode of the
original file, resave and reprint.
9.
Copper Contacts. Clean the copper contacts on the back of
the print carriage and the contacts on the print head with
rubbing alcohol and a paper towel.
Maintenance Station
Troubleshooting and Maintenance
61
Advertisement
Table of Contents
