Table of Contents
Advertisement
Paper Size
If you are using BarTender, this setting is adjusted during the label
setup wizard. If you are using a program other than BarTender you
will need to set this to the dimensions of your label. Keep in mind
that the dimensions are always relative
to the width and height of the actual label in the printer.
Orientation of an image on the label should not change this setting.
See Section 2A for minimum and maximum label sizes.
Orientation
There are two settings for orientation, Portrait and Landscape. If
your text and graphics print left to right or as shown on the screen,
select portrait. If you wish your printing to rotate 90 degrees from
what you see on the screen so it is printing
horizontally, select landscape as your orientation. Remember, this
does not change the width and height Paper Size. It is only a tool
for viewing a label upright on screen that will be printed sideways
on the printer.
Portrait
Print Quality
There are 4 levels of print quality in the driver. The lower the
quality, the faster the print. Quality 1 provides the fastest print
available while Quality 4 provides the best quality. It is
recommended that you experiment with the different levels when
designing your label to find a good balance between print quality
and print speed. Quality 2 is the default.
Color Matching
There are several options available depending on which cartridge is
installed (Pigment or Dye). The options will update automatically
depending on which cartridge is installed.
Landscape
Printing from a PC
37
Advertisement
Table of Contents
