Table of Contents
Advertisement
Section 1: Getting Started
THANK YOU...
... for choosing an LX910e Color Label Printer. The LX910e Printer
will print razor-sharp text and barcodes, vibrant colors, and even
stunning photo-realistic photographs directly onto rolls
of labels, card stock and a variety of other approved media.
This User's Manual is your complete step-by-step guide to quickly
and easily setting up and printing with your new Color Label
Printer!
A. CHOOSING A GOOD LOCATION
•
Place the printer on a flat surface in a location with
adequate air circulation to prevent internal heat build up.
•
Do not place the printer near heat sources such as radiators or
air ducts, or in a place subject to direct sun light,
excessive dust, mechanical vibration or shock.
•
Allow for adequate clearance in front of the printer to
accommodate the printed label stock as it is leaving the printer
to avoid the possibility of binding or jamming of the label stock.
•
Allow for adequate overhead and left side clearance for opening
the top cover to allow easy access to the label stock and ink
cartridge. The printer will require 24 cm (9.5 inches) of
additional space on the left side to completely open the cover
(Total = 68 cm or 26.75"). The printer will require an additional
40.4 cm (15.9 inches) of overhead space to open the cover (Total
= 63.5 cm or 25").
Getting Started 1
Advertisement
Table of Contents
