Transmitter Front Display; Front Display Information; Time Source Communication Status - Primex XR 5 Watt Install & Operation Manual

Transmitter Front Display

The front LCD display of a XR Series Transmitter displays its current status, configured settings, and allows you to perform
diagnostic tasks. The Transmitter's settings are configured from the setting panel located on the back of the unit.

Front display information

Listed below is a summary of the information provided on the front display of an XR Transmitter.
Time: current time set in the Transmitter.
l
Time Zone: Time Zone set in the Transmitter.
l
Daylight Saving Time Status: DST setting. DT (Daylight Saving Time) or ST (Standard Time) is displayed.
l
Time Source Connection: indicates the configured time source; GPS (
l
(Satellite) ( symbol).
Time Source Communication: status of GPS or NTP communication (
l
Firmware Version: firmware version of the Transmitter.
l
Day/Date: day and date received from the GPS or NTP time source.
l
Channel Number: channel number that the Transmitter is set to.
l
LED Status Indicator: status and operating condition of the Transmitter unit.
l
Menu: view Transmitter settings and Diagnostic Error Codes. For details, see topic
l

Time source communication status

The status of a Transmitter's time source is indicated by its communication indicator, located on its front display.
GPS time source: when the
l
communication between the GPS Receiver and Transmitter. When the Transmitter is receiving valid time data from the GPS
Receiver the three parentheses symbol
NTP time source: when configured to receive time from a NTP time source, a
l
Repeater (Satellite) Transmitter: when configured to receive time from another Transmitter, a
l
symbol is displayed the GPS Receiver is connected to the Transmitter and there is proper
will sequence in a motion pattern.
tower symbol), NTP ( symbol), Repeater
parentheses)
Transmitter Main Menu
symbol is displayed.
symbol is displayed.
.
47