Tools And Equipment Required - Primex XR 5 Watt Install & Operation Manual

Tools and Equipment Required

To following tools and equipment below are required to install a Transmitter with an External Antenna.
Hammer drill
l
Power drill
l
3/4 inch concrete drill bit, 18 in. (45.7 cm) long
l
Penetrating mount only: 5/8 inch concrete drill bit, 18 inch (45.7 cm) long
l
1/2 inch wrench
l
3/4 ft. deep well socket with ratchet
l
10 inch (25.4 cm) adjustable wrench
l
Phillips screwdriver
l
Flat head screwdriver
l
Lineman's pliers
l
Shears/scissors
l
Silicone caulk; required to seal cabling/ground penetration
l
Transmitter rack (recommended)
l
Building ground near Transmitter
l
Ground near transmitting antenna
l
18
XR 5 Watt & 30 Watt Transmitter Install & Operation Guide