Install Overview - Primex XR 5 Watt Install & Operation Manual

Install Overview

Before you begin to install a 5 or 30 Watt Transmitter with an External Antenna, review the information below.
Review the Installation Guidelines and identify the installation location of the Transmitter and system components.To learn
l
more, view "Installation Location Requirements" on page 19.
Inspect system components to verify packaging includes all supplied parts for each system component and verify no damage
l
has occurred during shipping.
Do not install or attempt to set the system wireless clocks or devices until the Transmitter and its components are installed and
l
configured; Transmitter is powered, its time source is configured and time is received, and is fully operational.
NOTE
Prior to the date of installation, the Pre-installation Requirements acknowledgment form is required to be completed and
submitted to Primex.
Installation overview
Listed below is a summary of the order in which the Transmitter, external antenna, and its components are to be installed and
configured.
Step 1: Assemble Ground Plane Omnidirectional Antenna
Step 2: Assemble Antenna Mast
Step 3: Secure Antenna to Mast
Step 4: Route Antenna LMR 400 Coaxial Cable
Step 5: Mount Antenna Mast
Step 6: Ground Antenna Mast
Step 7: Install GPS Receiver
Step 8: Complete Final Antenna Mounting Requirements
Step 9: Ground Transmitter
Step 10: Establish Transmitter Connections
Step 11: Configure NTP Time
Step 12: Establish Transmitter Settings
15