Identify Active Diagnostic Error Code - Primex XR 5 Watt Install & Operation Manual

Diagnostic menu specifications
There are seven entries that reflect the Transmitter configuration.
Firmware Rev: displays current version of software the Transmitter is running on.
Time Since Last GPS: displays how much time has passed since the Transmitter last received valid time from the GPS Receiver.
Hardware Rev: displays the hardware revision number
GPS/Repeater: displays if there is a GPS or a Repeater connected. If NTP is the time source, Repeater is displayed.
Last Repeater Update: displays how much time has passed since the Transmitter last received valid time from a Repeater Switch
or NTP time.
Serial Number: displays the Transmitter serial number.
MAC Address: displays the device ID for the Network Interface.

Identify Active Diagnostic Error Code

To identify the error code resulting in the red or yellow LED indicator, scroll to the entry that has a dot in front of it; which
indicates that entry is the error.
When a Transmitter error code occurs, the yellow or red LED flashes and the error is logged. The LEDs continue to flash until all
logged errors have been cleared.
Diagnostic Error Codes definitions
Bad Output Power: indicates the Transmitter is not transmitting at the appropriate power level.
PLL Diagnostics: indicates the Transmitter is having trouble locking onto a channel; rendering it unable to broadcast time or
schedules.
No GPS or Repeater Connected: indicates the Transmitter is not connected to a time source.
VSWR Errors: indicates there is a problem with either the High Power Antenna (may need repositioning) or the antenna cabling.
No GPS in 48 Hours: indicates the Transmitter has not synchronized to a time source for more than 48 hours.
No 1PPS in 48 Hours: indicates the time on the display has not been synchronized by 1PPS (1 Pulse Per Second) for more than 48
hours.
52
XR 5 Watt & 30 Watt Transmitter Install & Operation Guide