Document: 1014.100
2. XR T
RANSMITTER
2.1 XR Hardware Definitions
2.1.1 Back Panel Picture
This is a picture of the back panel label that shows the input connector positions and control switch positions
described in sections 2.1.3 and 2.1.4.
Figure 2 – Rear Panel of XR Transmitter
2.1.2 Front Panel Picture
This is a picture of the front panel that is defined section 2.3.2.
Figure 3 – Front Panel of XR Transmitter After Time Synchronization
2.1.3 Overall Picture of the XR Transmitter
This a picture of the transmitter which shows the whip antenna attached to the NMO mount on the case top.
Figure 4 – Overall Picture of XR Transmitter Showing the NMO Antenna Mounted
Confidential Document
New transmitter
P
O
RODUCT
PERATION
Page 6 of 14
ECN: 1.10