Primex XR 5 Watt Install & Operation Manual page 30

10. Repeat Steps 4 through 6.
11. Connect the LMR 400 cable to the antenna. Be sure the connection is tight.
12. Insert the mast into the clamps.
13. Tighten both clamps evenly and securely.
14. Install gelwrap splice enclosure over the connection between the LMR400 cable and antenna. Secure gelwrap to mast using
common electrical tape or cable ties.
15. Next, route the antenna cable. To learn more, view "Step 4: Route Antenna LMR 400 Coaxial Cable" on page 23.
30
XR 5 Watt & 30 Watt Transmitter Install & Operation Guide