Placing The Components In The Transport And Storage System - Days Casa Med Classic FS Operating Manual

NURSING BEDS
14.2 Placing the components in the transport
and storage system (TLSU)
Fix the bed ends to the TLSU as follows:
(1.) Push the TLSU (1) onto the bed end
guides.
(2.) Push the second bed end with the
guides into the TLSU mountings.
Fix the connection by tightening the
clamping screws (2).
Push the mattress support foot section
(3) into the TLSU guides and secure by
tightening the hand levers.
Push the mattress support head section
(4) onto the TLSU guides and secure by
tightening the hand levers.
Place the laying area motor, bed rails
and small parts upright between the
mattress support components (packed in
original carton if possible (5)).
Push the patient pole into the TLSU
mounting (6).
64
Issued: 25.07.2007
NOTE:
The mountings (a) with the
clamping screws must be
pointing in the same direction.
Casa Med Classic FS
Storage
Fix the bed ends to the
TLSU