NURSING BEDS
10.3 Locking the nursing bed adjustments at the hand set
Possible danger through altering patient's position!
• Always lock the nursing bed adjustment functions on the hand
set which could cause danger to the patient's health if adjusted
(consult doctor).
Locking the adjustments takes place using the hand set.
The hand set operation is described in Chapter 9.4.
Test locking by operating the function keys on the hand set.
The adjustment must not move.
If the locking system is faulty, replace the hand set or the control
unit.
11.0 Cleaning
NOTE:
• When cleaning this bed, do not use any sharp-edged tools
(knives, metal scrapers) or aggressive solvents.
• Do not use high-pressure cleaners to clean this bed.
• Observe the instructions issued with the cleansing agent
in order to avoid damage to component surfaces.
Use damp cloths to carry out cleaning work.
Only use mild cleansers free of scouring agents for cleaning
any metal, wooden or plastic surfaces.
52
Issued: 25.07.2007
Casa
Med Classic FS
Cleaning