Table of Contents
Advertisement
NURSING BEDS
7.8
Inserting the mattress support
motor for foot section adjustment
Open the quick-release bolt retainer (1).
Insertion direction = The mattress support
motor with the motor housing (2) is fixed
under the mattress support pointing towards
the head end (observe label on nursing bed).
Pass the receptacle of the motor side (2)
between the mattress support frame tabs
(3).
Insert the quick-release bolt (4) and
secure by closing the retainer.
Pass the second receptacle (5) between
the foot end adjustment frame tabs (6).
Insert the quick-release bolt (7) and
secure by closing the retainer.
26
Issued: 25.07.2007
Setting up the nursing bed
Casa
Med Classic FS
Head end
Foot
Advertisement
Table of Contents
