Routing And Fixing The Control Unit Mains Cable - Days Casa Med Classic FS Operating Manual

NURSING BEDS
7.9 Routing and fixing the control
unit mains cable
When routing cables, ensure that:
• the cables are not subjected to tension
• the cables do not hang too deeply
• cables are not routed close to locations
were crushing or shearing can take place
NOTE
There is one fixing (1) for screwing in
the mains cable anti-kink and tension
protectors on the head and foot of the
bedframe.
Routing the mains cable along the
head of the bed is recommended.
Route the mains cable to one of the
fixings (1) on the head section for fixing
the anti-kink and tension protectors.
Fix the mains cable and bolted
connection (2) through the fixing (1)
on the bedframe and bolt tight with
the nut (3) (size 19 mm).
Screw the anti-kink and tension
protector cover (4) onto the bolted
connection (2) and screw tight
(size 19 mm).
Setting up the nursing bed
Casa Med Classic FS
Fixing for anti-kink and
tension protectors
Head end
Detail: anti-kink and
tension protectors
Issued: 25.07.2007
27