Table of Contents
Advertisement
NURSING BEDS
5.2
Mattress support
The mattress support is separated into 4
parts. The wooden slats can be wiped clean,
and are fixed to the frame with plastic fixings.
The mattress is fixed securely to the mattress
support using four mattress fixings (3).
4-part separation of mattress support:
The head section (2) can be electrically
adjusted up to 70°, the foot section (3)
up to 20°.
5.3
Angle adjustment foot section
(Rastomat)
The automatic catch (1) mounted at the foot
end of the mattress support enables
incremental adjustment of the lower leg
adjustment (3) of the 4-part mattress
support.
5.4
Bed ends
The bed ends are fitted with a lift motor (1)
and two castors (2).
The castors are provided with brakes.
The brakes lock both rolling and swiveling
movements.
16
Issued: 25.07.2007
Casa
Med Classic FS
Fittings: bed frame
Mattress support
Rastomat
Bed end
Advertisement
Table of Contents
